PRE-VENT BR13 3-Way Control Valve

PRE-VENT BR13 3-Way Control Valve

APPLICATION

• The 3-Way Control Valves BR13 are used for mixing (BR13M) or diverting (BR13R) service. They are recommended for applications in city heating, HVAC systems and many branches of the industry. The version with bellows allowed the additional use of heat sources (e.g. thermal oil).
  Note: A mixing valve should only be used for low differential pressures or gases and vapors in the ON/OFF function for diverting service.​

FEATURES 

• Nominal Diameters from DN15 up to DN250
• Nominal Pressure from PN10 up to CL300
• Face-to-Face length as per DIN EN 60534-3-1 or ANSI/ISA 75.08
• Temperature range -196°C up to +450°C
• Leakage Class IV and VI according to DIN EN 60534-4
• Characteristic: Linear (L)
• Seat guided Contoured Plug with Slot Plug
• Rangeability 50:1
• Design with Flange ends, TA-Luft, Bellows seal bonnet possible
• Design as per Pressure Equipment Directive 2014/68/EU
• Conformity CE and EAC
• Optional certification/confirmation according to ATEX 2014/34/EU, GOST-R (TR) and AD2000 Merkblatt

DESIGN AND TECHNICAL SPECIFICATION

• Diameters: DN15; 20; 25; 32; 40; 50; 65; 80; 100; 150; 200*; 250* * Special executions on request.
• Pressure: PN10; 16; 25; 40 as per DIN EN 1092-1:2013 and DIN EN 1092-2:1999 ANSI CL150; 300 and DIN EN 1759-1:2005 

Flanges as per DIN EN 1759-1:2005 can be assembled with flanges execution per standards ANSI / ASME B16.5 and MSS SP44. They correspond to the standard DIN EN 7005-1:2002 following pressure ranges: CL150 PN20 and CL300 PN50.

Visit our PRE-VENT product page to find the link to all datasheets (pdf).