You are here

Projects

2017

  • Quadax quadruple offset butterfly valves with Kinetrol actuators. This combination was the solution to meet all the different requirements of the customer. Complete units are intended for petrochemical industry and designed, assembled & tested at PRODIM.
  • DN 800 MIV Butterfly check valve with electro-hydraulic shock absorber system with 2 stage closing system. Body & disc hard rubber lined
  • DN 200 , Wafer type, Quadax quadruple offset metal seated butterfly valve with single acting OMAL actuator (scotch yoke) installed as ESD valves in a tankfarm. Order completed with 2 On/OFF Quadax valve with Rotork electric actuator
  • 54 SAFI Flanged ball valves ,DN 25 up to DN50, completed with Remote Control single acting RCT actuator for installation in chemical plant.
  • 144 pieces of Kinetrol spring return pneumatic actuators (fail open) type 074 with AP electro pneumatic positioner and 2 x V3 microswitches and filter-regulator. These will be mounted on air registers for a project in Russia.
  • 3-way stainless steel ball valve, type B-MW 3L/120, 4" Class 150 RF FB, with pneumatic actuator GT GTW-NM-118X120DA and Soldo SK switchbox
  • Quadax valve 10"-300# with superduplex bolting, mounted with Rotork ┬╝ turn electric actuator, type IQT2000 and ER- Fire proof coating

2016

  • SRI trunnion mounted ball valves 4" & 6" 150 & 300# with Rotork RC pneumatic actuators and Soldo box. Quadax quadruple offset valves 6", 8", 14" and 16" 150# and 300# with Rotork RC and GP pneumatic actuators and Soldo box. Project in Antwerp.
  • Spring return KINETROL actuators 184-130, 204-130 & 300-130 with Eexd positioners and stainless steel tubing ready for mounting on big size damper valves.
  • OMAL stainless steel ball valves 2-way & 3-way, DN25 & DN50, PN40, manual operated en mounted with KINETROL Eexd limit switch box.
  • SAFI flanged ball valves in PPVF, DN65, DN80 & DN 100, PN10 mounted with SCHISCHEK spring return elektric actuators 230 VAC
  • Lot of A & R ball valves from DN15 to DN80 PN16 RF in stainless steel with stem extension and locking device
  • 4 pieces OMNI Double Block & Bleed dual expanding plug valve 6 "& 8" 300 # RF in LCC, with bleed connection and gear box for project in Antwerp
  • Automated valves project on water application, with XUROX butterfly valves and ROTORK electric actuators, as well as stainless steel ball valves with SCHISCHEK electric spring to close actuators
  • DN200 PN10 manual diaphragm valve from SAFI in PVDF with open/close notification
  • 2 pieces DN25 ANSI Class 900 globe valves in 1.4910 material BW connection

2015

  • Rigau pressure seal bonnet, parallel slide gate valve 4" ANSI Class 900 RTJ with by-pass 1" in A217 WC6 material and trim 5
  • 15 pcs SRI A90RL ball valves in 8" 600# RF, whereof 2 with Rotork CP actuator, soldo box and control panel, 2 pcs 24" 150# RF with gear, and 112 pcs SRI BF2000 ball valves from 1/2" to 2" in ANSI 150# and 600# for a project in Antwerp.
  • Package of A+R ball valves and Quadax butterfly valves from 2" to 8" with Rotork IQT electric actuators and Kinetrol fail-safe levers for a project in Luxembourg.
  • Rotork automated Xurox butterfly valves, knife gate valves and ball valves & Pre-Vent control valves for a project in Russia.
  • SRI trunnion mounted ball valves ANSI Class 600 RF 5 pieces 10" with Rotork IQT 2000 & 5 pieces 3" with Rotork IQT 125 for a project in Vietnam.
  • PROTECTOSEAL DN 50 tank ventilation and breather valves in stainless steel with integrated position indication by sensors.
  • 6" ANSI 300# SRI A90 RL trunnion mounted ball valves low temperature forged steel with single acting pneumatic REMOTE CONTROL actuators and switchboxes.
  • Pinch valves DN50 PN16 with single acting pneumatic actuator and electro-pneumatic positioner on a lime milk application.
  • SAFI GRPP ball valves DN80 mounted with REMOTE CONTROL pneumatic single acting actuators with Tufram coating on a sulphuric acid application
  • 24 pieces Tank bottom ball valves DN100 x DN80 PN16 with Rotork Remote Control Tufram coated pneumatic single acting actuators and switchboxes
  • SRI A90RL RK trunnion mounted ball valve 1/2" x 3/4" x 1/2" ANSI Class 1500# RTJ in 316L with cryogenic extention and REMOTE CONTROL pneumatic single acting scotch & yoke actuator RC240-SR035
  • Replacement of +/- 70 pieces electro-hydraulic actuators by ROTORK Skilmatic actuators on existing triple offset valves and on new QUADAX four offset valves between 6" & 18" ANSI Class 150#.
  • 6" ANSI Class 150# OMNI double block & bleed plug valve with welded by-pass, assembly CE approved on request of our customer
  • SRI ball valves 2" & 8" ANSI Class 900 part manual with ROTORK gears and SOLDO switchboxes, and part with ROTORK electric actuators for a project in Australia
  • Around 600 pieces on/off and control valves from 1/2" to 20" ANSI Class 150 & 300, SRI & SAFI bal valves, QUADAX valves, REMOTE CONTROL actuators, SOLDO switchboxes, RIGAU gate & globe valves, PREVENT control valves and others (project Middle East)

2014

  • Mounting of REMOTE CONTROL type RCG actuators on 14" ANSI Class 300# ball valves.
  • More then 100 pieces A+R & SAFI ball valves, SAFI butterfly valves, pinch valves, diaphragm valves & REMOTE CONTROL actuators for a project in Peru.
  • 2 pieces SRI trunnion mounted ball valves 6" ANSI Class 2500# RTJ with ROTORK electric actuators IQ12 for a project in Angola
  • 3 pieces QUADAX flow control valves with ROTORK REMOTE CONTROL RC88 fail open pneumatic actuators and Siemens positioner for a project in Kuwait
  • 2 pieces QUADAX Emergency Shut Down valves 16" ANSI Class 300# with Skilmatic ROTORK electro-hydraulic actuators and DARCHEM fire proofing for a project in Antwerp
  • 20 pieces OMNI double block & beed manual plug valves 8" ANSI Class 150 and Kinetrol switchboxes for a project in Antwerp
  • 4 pieces 24" ANSI Class 600# ball valves with Rotork IQ20 electric actuators for a project in Turkmenistan

Before 2014

  • Butterfly damper valve DN700 mounted with a KINETROL single acting pneumatic actuator, for corrosive gas application.
  • Remote Control actuators including control panels and positioners for mounting on Quadax valves. Project for Germany.
  • Mounting of a Rotork pneumatic actuator type GP on a trunnion mounted ball valve 16" ANSI Class 1500#
  • Mounting of a Rotork actuator on a 12" gate valve 2500#
  • Quadax DN 200 PN16 butterfly valve mounted in between double wall tank with electro-hydraulic fail safe ROTORK Skilmatic actuator at outside of the tank. Project in Luxembourg.
  • SRI Trunnion mounted Ball valves 6" ANSI 300 RF mounted with Remote Control pneumatic actuator with handwheel and switchbox.
  • SRI Pig Launcher valve 12" ANSI 600 RF at test bench, delivered for project in Antwerp.
  • SRI Trunnion mounted Ball valves from 1/2" up to 2" in Stainless Steel ANSI 1500 RF mounted with Remote Control pneumatic actuators.
  • SAFI Ball valve in GRPP DN100 mounted with Remote Control pneumatic actuator with handwheel and RC switchbox.
  • A+R Metal seated Ball valve 6" ANSI 150 RF mounted with Remote Control RC88 spring return actuator.
  • DN 1750 Butterfly valve with Kinetrol actuator with manual overide.
  • DN800 Piping in composite material (GRP).
  • Kinetrol double acting actuators with NAMUR solenoids and Kinetrol switchbox.